Composite resin microhardness: the influence of light curing method, composite shade, and depth of cure
The aim of this study was to investigate the influence of light curing method, composite shade, and depth of cure on composite microhardness. Forty-eight specimens with 4 mm of depth were prepared with a hybrid composite (Filtek Z-100, 3M ESPE); 24 with shade A1 and the remaining with shade C2. For...
Gespeichert in:
Veröffentlicht in: | The journal of contemporary dental practice 2008-05, Vol.9 (4), p.43-50 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The aim of this study was to investigate the influence of light curing method, composite shade, and depth of cure on composite microhardness.
Forty-eight specimens with 4 mm of depth were prepared with a hybrid composite (Filtek Z-100, 3M ESPE); 24 with shade A1 and the remaining with shade C2. For each shade, two light curing units (LCUs) were used: a quartz-tungsten-halogen (QTH) LCU (Optilight Plus - Gnatus) and a light emitting diode (LED) LCU (LEC 470 II - MM Optics). The LED LCU was tested using two exposure times (LED 40 seconds and LED 60 seconds). After 24-hour storage, three indentations were made at mm depth intervals using a Knoop indenter. Data were submitted to three-way analysis of variance (ANOVA) and Tukey's test (p |
---|---|
ISSN: | 1526-3711 1526-3711 |
DOI: | 10.5005/jcdp-9-4-43 |