Effects of Linear Alkylbenzene Sulfonate on the Sorption of Brij 30 and Brij 35 onto Aquifer Sand

Surfactant sorption is of considerable importance to environmental applications, including surfactant flushing to mobilize hydrophobic contaminants; effects of surfactants on the transport of dissolved contaminants, microorganisms, and colloids through porous media; and bioremediation of hydrophobic organic compounds, as well as understanding the fate and transport of surfactants as environmental contaminants themselves. Although most sorption studies consider pure surfactants, commercial detergent formulations typically consist of mixtures of nonionic and anionic surfactants. In this study, the effects of varying concentrations of the anionic surfactant linear alkylbenzene sulfonate (LAS) on micelle formation and sorption behavior of the two commonly used nonionic surfactants Brij 30 and Brij 35 onto aquifer sand were examined. A strong linear relationship was observed between the critical micelle concentration (CMC) of the Brij surfactants and the concentration of LAS in the mixture, with the CMC decreasing with increasing concentration of LAS. The relative change in CMC as a function of the LAS concentration was identical for the two Brij surfactants, indicating that LAS interacted with their common alkyl chains. Sorption isotherms were developed for Brij 30 and Brij 35 present as single surfactants in an aqueous solution as well as when present with LAS. Although LAS had minor effects on the maximum sorption plateaus of the Brij surfactants, Brij sorption at was significantly enhanced as a function of the LAS concentration for Brij aqueous concentrations below the CMC. Application of a multi-interaction isotherm model indicated that the formation of surface aggregates (e.g., hemimicelles) decreased with increasing LAS concentration. Overall, these results provide insight into the complex sorption behavior of surfactant mixtures.