Finite element analysis of the temporomandibular joint during lateral excursions of the mandible

One of the most significant characteristics of the temporomandibular joint (TMJ) is that it is in fact composed of two joints. Several finite element simulations of the TMJ have been developed but none of them analysed the different responses of its two sides during nonsymmetrical movement. In this paper, a lateral excursion of the mandible was introduced and the biomechanical behaviour of both sides was studied. A three-dimensional finite element model of the joint comprising the bone components, both articular discs, and the temporomandibular ligaments was used. A fibre-reinforced porohyperelastic model was introduced to simulate the behaviour of the articular discs, taking into account the orientation of the fibres in each zone of these cartilage components. The mandible movement during its lateral excursion was introduced as the loading condition in the analysis. As a consequence of the movement asymmetry, the discs were subjected to different load distributions. It was observed that the maximal shear stresses were located in the lateral zone of both discs and that the lateral attachment of the ipsilateral condyle–disc complex suffered a large distortion, due to the compression of this disc against the inferior surface of the temporal bone. These results may be related with possible consequences of a common disorder called bruxism. Although it would be necessary to perform an exhaustive analysis of this disorder, including the contact forces between the teeth during grinding, it could be suggested that a continuous lateral movement of the jaw may lead to perforations of both discs in their lateral part and may damage the lateral attachments of the disc to the condyle.