Alkylphosphonate Modified Aluminum Oxide Surfaces

The surface properties of aluminum, such as chemical composition, roughness, friction, adhesion, and wear, can play an important role in the performance of micro-/nano-electromechanical systems, e.g., digital micromirror devices. Aluminum substrates chemically reacted with octadecylphosphonic acid (ODP/Al), decylphosphonic acid (DP/Al), and octylphosphonic acid (OP/Al) have been investigated and characterized by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and atomic force microscopy (AFM). XPS analysis confirmed the presence of alkylphosphonate molecules on ODP/Al, DP/Al, and OP/Al. No phosphonates were found on bare Al as a control. The sessile drop static contact angle of pure water on ODP/Al and DP/Al was typically more than 115° and on OP/Al typically less than 105° indicating that all phosphonic acid reacted Al samples were highly hydrophobic. The root-mean-square surface roughness for ODP/Al, DP/Al, OP/Al, and bare Al was less than 15 nm as determined by AFM. The surface energy for ODP/Al and DP/Al was determined to be approximately 21 and 22 mJ/m2, respectively, by the Zisman plot method, compared to 25 mJ/m2 for OP/Al. ODP/Al and OP/Al were studied by friction force microscopy, a derivative of AFM, to better understand their micro-/nano-tribological properties. ODP/Al gave the lowest coefficient of friction values while bare Al gave the highest. The adhesion forces for ODP/Al and OP/Al were comparable.