Diagnosis of intraocular foreign bodies in multidetector-CT: influence of acquisition parameters on radiation dose and detectability

Determination of the influence of acquisition and reconstruction parameters on radiation dose and detectability of intraocular foreign bodies using multidetector CT (MDCT). Porcine eyes with intraocular foreign bodies of a 0.3-mm quartz fiber and a 0.1-mm steel wire as well as 0.5 ml of blood in the vitreous were investigated using MDCT. The tube current was 500, 250, 100, and 50 mAs; the collimation was 16 x 0.75 mm and 16 x 1.5 mm; and the pitch was 0.5 and 0.75. Image reconstruction was performed using a soft tissue (H30), a bone algorithm (H60 s), and thin (0.7 and 2 mm, respectively) and thick (2 and 4 mm, respectively) reconstruction increments. The resulting data sets were then used to determine the signal difference to noise ratio (SDNR) between the foreign body and adjacent vitreous. Changes in tube current resulted in a proportional change in the radiation dose but only in the SDNR within a range of 1:2. Reducing the collimation from 1.5 mm to 0.75 mm resulted in a doubling of the SDNR at an approximately identical radiation dose. The series with a lower pitch at the same dose per volume showed a slightly higher SDNR. Reconstruction using a bone algorithm and thin increments resulted in an increase in the mean SDNR by a factor of 1.8 to 2.3. When diagnosing small intraocular foreign bodies using MDCT, the following parameters can yield an adequate SDNR while minimizing radiation exposure: tube current 50 mAs, pitch 0.5, collimation 16 x 0.75, bone algorithm, and reconstruction increment 0.7 mm.