Relationship between shear stress on the walls of a pipe and an impinging jet

In order to relate a shear stress controlled-corrosion at the impinged jet wall to that in a pipe the pressure drop along a jet tube and the mass transfer rate at eight locations on the jet-impinged wall were measured concurrently using microelectrodes. The shear stress on the impinged jet wall incr...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Corrosion science 2008-11, Vol.50 (11), p.3241-3246
Hauptverfasser: Demoz, A., Dabros, T.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In order to relate a shear stress controlled-corrosion at the impinged jet wall to that in a pipe the pressure drop along a jet tube and the mass transfer rate at eight locations on the jet-impinged wall were measured concurrently using microelectrodes. The shear stress on the impinged jet wall increased radially giving stagnation and jet wall regions in the order of 2 and 2.9 times the jet radius, respectively. The mean of the jet-impinged wall shear stresses at all radial positions was 50–120 times that at the pipe wall at any given Re. A factor of about 80 may be used where the jet impinged wall corrosion rates are to be used to estimate corrosion in pipe flow at the same Re.
ISSN:0010-938X
1879-0496
DOI:10.1016/j.corsci.2008.08.025