Modelling of Manganese Sulphide Formation during Solidification, Part II: Correlation of Solidification and MnS Formation

The high temperature properties of steels depend on the solidification parameters and the formation parameters of manganese sulphide precipitates. Therefore, the occurrence of MnS precipitations in relation to primary and secondary microstructures was studied for different steel grades with a primary delta‐ferritic solidification or a primary austenitic solidification. The liquidus and solidus temperatures as well as the δ‐γ‐transformation temperature were calculated thermodynamically and measured by a DTA analysis in order to describe the solidification and transformation temperature range. The MnS formation temperature was calculated thermodynamically and compared to the results of SEM/EDX investigations on fracture surfaces of hot tensile specimens torn at different temperatures after in situ melting and controlled solidification. A special focus of these investigations was the location of MnS precipitates in relation to the primary and secondary grain boundaries. To explain the results, calculations were carried out taking into account the supersaturation of manganese and sulphur during the solidification in residual melt on the primary grain boundaries.