Hybrid composites under high strain rate compressive loading
Hybrid composites consist of two or more types of fibres and/or matrices in a composite. By combining two or more types of fibres, it is possible to club advantages of both the fibres while simultaneously mitigating their less desirable qualities. Investigations on high strain-rate behaviour of a ty...
Gespeichert in:
| Veröffentlicht in: | Materials science & engineering. A, Structural materials : properties, microstructure and processing Structural materials : properties, microstructure and processing, 2008-12, Vol.498 (1), p.87-99 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 99 |
|---|---|
| container_issue | 1 |
| container_start_page | 87 |
| container_title | Materials science & engineering. A, Structural materials : properties, microstructure and processing |
| container_volume | 498 |
| creator | Naik, N.K. Ch, Veerraju Kavala, Venkateswara Rao |
| description | Hybrid composites consist of two or more types of fibres and/or matrices in a composite. By combining two or more types of fibres, it is possible to club advantages of both the fibres while simultaneously mitigating their less desirable qualities. Investigations on high strain-rate behaviour of a typical hybrid composite under compressive loading are presented. The hybrid composite is made using satin weave carbon and plain weave E-glass with epoxy resin. Studies were also carried out on satin weave carbon/epoxy and plain weave E-glass/epoxy. Compressive split Hopkinson pressure bar (SHPB) apparatus was used for the studies. Compressive properties were evaluated along all the three principal directions in the strain-rate range of 546–1503
s
−1. During SHPB testing of the specimens, it was observed that the peak force obtained from the strain gauge mounted on the transmitter bar is lower than the peak force obtained from the strain gauge mounted on the incident bar. The explanation for this is provided based on stress wave attenuation studies. |
| doi_str_mv | 10.1016/j.msea.2007.10.124 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_35828242</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0921509308007259</els_id><sourcerecordid>35828242</sourcerecordid><originalsourceid>FETCH-LOGICAL-c361t-5deefd05089ce229272ef7c867d3bd7ae954a1ce8211476703447310b1ff6f853</originalsourceid><addsrcrecordid>eNp9kEtLA0EQhAdRMEb_gKe96G1jz2N3ZiEXCWqEgBc9D5OZ3mTCZjdObwL59-YhHj01FF9V0cXYPYcRB14-rUZrQjcSAHp01IS6YANutMxVJctLNoBK8LyASl6zG6IVAHAFxYCNp_t5iiHz3XrTUeyRsm0bMGXLuFhm1CcX2yy5Hk9EQqK4w6zpXIjt4pZd1a4hvPu9Q_b1-vI5meazj7f3yfMs97LkfV4ExDpAAabyKEQltMBae1PqIOdBO6wK5bhHIzhXutQgldKSw5zXdVmbQg7Z4zl3k7rvLVJv15E8No1rsduSlYURRihxAMUZ9KkjSljbTYprl_aWgz0OZVf2OJQ9DnXShDqYHn7THXnX1Mm1PtKfU4AxFQh54MZnDg-v7iImSz5i6zHEhL63oYv_1fwA1qJ-EA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>35828242</pqid></control><display><type>article</type><title>Hybrid composites under high strain rate compressive loading</title><source>Access via ScienceDirect (Elsevier)</source><creator>Naik, N.K. ; Ch, Veerraju ; Kavala, Venkateswara Rao</creator><creatorcontrib>Naik, N.K. ; Ch, Veerraju ; Kavala, Venkateswara Rao</creatorcontrib><description>Hybrid composites consist of two or more types of fibres and/or matrices in a composite. By combining two or more types of fibres, it is possible to club advantages of both the fibres while simultaneously mitigating their less desirable qualities. Investigations on high strain-rate behaviour of a typical hybrid composite under compressive loading are presented. The hybrid composite is made using satin weave carbon and plain weave E-glass with epoxy resin. Studies were also carried out on satin weave carbon/epoxy and plain weave E-glass/epoxy. Compressive split Hopkinson pressure bar (SHPB) apparatus was used for the studies. Compressive properties were evaluated along all the three principal directions in the strain-rate range of 546–1503
s
−1. During SHPB testing of the specimens, it was observed that the peak force obtained from the strain gauge mounted on the transmitter bar is lower than the peak force obtained from the strain gauge mounted on the incident bar. The explanation for this is provided based on stress wave attenuation studies.</description><identifier>ISSN: 0921-5093</identifier><identifier>EISSN: 1873-4936</identifier><identifier>DOI: 10.1016/j.msea.2007.10.124</identifier><language>eng</language><publisher>Kidlington: Elsevier B.V</publisher><subject>Applied sciences ; Composites ; Compressive loading ; Exact sciences and technology ; Forms of application and semi-finished materials ; High strain rate ; Hybrid composite ; Mechanical properties ; Physical properties ; Polymer industry, paints, wood ; Properties and testing ; Technology of polymers ; Woven fabric</subject><ispartof>Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2008-12, Vol.498 (1), p.87-99</ispartof><rights>2008 Elsevier B.V.</rights><rights>2009 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c361t-5deefd05089ce229272ef7c867d3bd7ae954a1ce8211476703447310b1ff6f853</citedby><cites>FETCH-LOGICAL-c361t-5deefd05089ce229272ef7c867d3bd7ae954a1ce8211476703447310b1ff6f853</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/j.msea.2007.10.124$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>310,311,315,781,785,790,791,3551,23935,23936,25145,27929,27930,46000</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=20889023$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Naik, N.K.</creatorcontrib><creatorcontrib>Ch, Veerraju</creatorcontrib><creatorcontrib>Kavala, Venkateswara Rao</creatorcontrib><title>Hybrid composites under high strain rate compressive loading</title><title>Materials science & engineering. A, Structural materials : properties, microstructure and processing</title><description>Hybrid composites consist of two or more types of fibres and/or matrices in a composite. By combining two or more types of fibres, it is possible to club advantages of both the fibres while simultaneously mitigating their less desirable qualities. Investigations on high strain-rate behaviour of a typical hybrid composite under compressive loading are presented. The hybrid composite is made using satin weave carbon and plain weave E-glass with epoxy resin. Studies were also carried out on satin weave carbon/epoxy and plain weave E-glass/epoxy. Compressive split Hopkinson pressure bar (SHPB) apparatus was used for the studies. Compressive properties were evaluated along all the three principal directions in the strain-rate range of 546–1503
s
−1. During SHPB testing of the specimens, it was observed that the peak force obtained from the strain gauge mounted on the transmitter bar is lower than the peak force obtained from the strain gauge mounted on the incident bar. The explanation for this is provided based on stress wave attenuation studies.</description><subject>Applied sciences</subject><subject>Composites</subject><subject>Compressive loading</subject><subject>Exact sciences and technology</subject><subject>Forms of application and semi-finished materials</subject><subject>High strain rate</subject><subject>Hybrid composite</subject><subject>Mechanical properties</subject><subject>Physical properties</subject><subject>Polymer industry, paints, wood</subject><subject>Properties and testing</subject><subject>Technology of polymers</subject><subject>Woven fabric</subject><issn>0921-5093</issn><issn>1873-4936</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2008</creationdate><recordtype>article</recordtype><recordid>eNp9kEtLA0EQhAdRMEb_gKe96G1jz2N3ZiEXCWqEgBc9D5OZ3mTCZjdObwL59-YhHj01FF9V0cXYPYcRB14-rUZrQjcSAHp01IS6YANutMxVJctLNoBK8LyASl6zG6IVAHAFxYCNp_t5iiHz3XrTUeyRsm0bMGXLuFhm1CcX2yy5Hk9EQqK4w6zpXIjt4pZd1a4hvPu9Q_b1-vI5meazj7f3yfMs97LkfV4ExDpAAabyKEQltMBae1PqIOdBO6wK5bhHIzhXutQgldKSw5zXdVmbQg7Z4zl3k7rvLVJv15E8No1rsduSlYURRihxAMUZ9KkjSljbTYprl_aWgz0OZVf2OJQ9DnXShDqYHn7THXnX1Mm1PtKfU4AxFQh54MZnDg-v7iImSz5i6zHEhL63oYv_1fwA1qJ-EA</recordid><startdate>20081220</startdate><enddate>20081220</enddate><creator>Naik, N.K.</creator><creator>Ch, Veerraju</creator><creator>Kavala, Venkateswara Rao</creator><general>Elsevier B.V</general><general>Elsevier</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope><scope>7SR</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>20081220</creationdate><title>Hybrid composites under high strain rate compressive loading</title><author>Naik, N.K. ; Ch, Veerraju ; Kavala, Venkateswara Rao</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c361t-5deefd05089ce229272ef7c867d3bd7ae954a1ce8211476703447310b1ff6f853</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2008</creationdate><topic>Applied sciences</topic><topic>Composites</topic><topic>Compressive loading</topic><topic>Exact sciences and technology</topic><topic>Forms of application and semi-finished materials</topic><topic>High strain rate</topic><topic>Hybrid composite</topic><topic>Mechanical properties</topic><topic>Physical properties</topic><topic>Polymer industry, paints, wood</topic><topic>Properties and testing</topic><topic>Technology of polymers</topic><topic>Woven fabric</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Naik, N.K.</creatorcontrib><creatorcontrib>Ch, Veerraju</creatorcontrib><creatorcontrib>Kavala, Venkateswara Rao</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><collection>Engineered Materials Abstracts</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Materials science & engineering. A, Structural materials : properties, microstructure and processing</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Naik, N.K.</au><au>Ch, Veerraju</au><au>Kavala, Venkateswara Rao</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Hybrid composites under high strain rate compressive loading</atitle><jtitle>Materials science & engineering. A, Structural materials : properties, microstructure and processing</jtitle><date>2008-12-20</date><risdate>2008</risdate><volume>498</volume><issue>1</issue><spage>87</spage><epage>99</epage><pages>87-99</pages><issn>0921-5093</issn><eissn>1873-4936</eissn><abstract>Hybrid composites consist of two or more types of fibres and/or matrices in a composite. By combining two or more types of fibres, it is possible to club advantages of both the fibres while simultaneously mitigating their less desirable qualities. Investigations on high strain-rate behaviour of a typical hybrid composite under compressive loading are presented. The hybrid composite is made using satin weave carbon and plain weave E-glass with epoxy resin. Studies were also carried out on satin weave carbon/epoxy and plain weave E-glass/epoxy. Compressive split Hopkinson pressure bar (SHPB) apparatus was used for the studies. Compressive properties were evaluated along all the three principal directions in the strain-rate range of 546–1503
s
−1. During SHPB testing of the specimens, it was observed that the peak force obtained from the strain gauge mounted on the transmitter bar is lower than the peak force obtained from the strain gauge mounted on the incident bar. The explanation for this is provided based on stress wave attenuation studies.</abstract><cop>Kidlington</cop><pub>Elsevier B.V</pub><doi>10.1016/j.msea.2007.10.124</doi><tpages>13</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0921-5093 |
| ispartof | Materials science & engineering. A, Structural materials : properties, microstructure and processing, 2008-12, Vol.498 (1), p.87-99 |
| issn | 0921-5093 1873-4936 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_35828242 |
| source | Access via ScienceDirect (Elsevier) |
| subjects | Applied sciences Composites Compressive loading Exact sciences and technology Forms of application and semi-finished materials High strain rate Hybrid composite Mechanical properties Physical properties Polymer industry, paints, wood Properties and testing Technology of polymers Woven fabric |
| title | Hybrid composites under high strain rate compressive loading |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-16T10%3A58%3A37IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Hybrid%20composites%20under%20high%20strain%20rate%20compressive%20loading&rft.jtitle=Materials%20science%20&%20engineering.%20A,%20Structural%20materials%20:%20properties,%20microstructure%20and%20processing&rft.au=Naik,%20N.K.&rft.date=2008-12-20&rft.volume=498&rft.issue=1&rft.spage=87&rft.epage=99&rft.pages=87-99&rft.issn=0921-5093&rft.eissn=1873-4936&rft_id=info:doi/10.1016/j.msea.2007.10.124&rft_dat=%3Cproquest_cross%3E35828242%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=35828242&rft_id=info:pmid/&rft_els_id=S0921509308007259&rfr_iscdi=true |