Microstructure and elemental distribution of americium-containing uranium plutonium mixed oxide fuel under a short-term irradiation test in a fast reactor

In order to investigate the effect of americium addition in MOX fuel on the irradiation behavior, the ‘Am-1’ program is being conducted in the experimental fast reactor Joyo. The Am-1 program consists of two short-term irradiation tests of 10min and 24h irradiations and a steady-state irradiation te...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of nuclear materials 2009-03, Vol.385 (2), p.407-412
Hauptverfasser: Tanaka, Kosuke, Miwa, Shuhei, Sato, Isamu, Hirosawa, Takashi, Obayashi, Hiroshi, Koyama, Shin-ichi, Yoshimochi, Hiroshi, Tanaka, Kenya
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In order to investigate the effect of americium addition in MOX fuel on the irradiation behavior, the ‘Am-1’ program is being conducted in the experimental fast reactor Joyo. The Am-1 program consists of two short-term irradiation tests of 10min and 24h irradiations and a steady-state irradiation test. The short-term irradiation tests were successfully completed and the post irradiation examinations (PIEs) are in progress. This paper reports on the results of PIEs for Am-containing MOX fuel irradiated for 10min. MOX fuel pellets containing 3% or 5% Am were fabricated in a shielded air-tight hot cell using a remote handling technique. The oxygen to metal ratio (O/M) of these fuel pellets was 1.98. They were irradiated at peak linear heating rate of about 43kWm−1. Focus was being placed on migration behavior of Am during the irradiation. The ceramography results showed that structural changes such as lenticular pores and a central void occurred early, within the brief 10min of irradiation. The results of electron probe microanalysis revealed that the concentration of Am increased in the vicinity of the central void.
ISSN:0022-3115
1873-4820
DOI:10.1016/j.jnucmat.2008.12.028