Residual stress induced crack tip constraint

This paper studies the effect of welding residual stresses on the near tip stress field in single edge notched bending and tensile specimens. A combined effect of mechanical stresses by the applied load and residual stress on the crack tip constraint is analyzed. Three initial residual stress distributions were considered. It has been shown that the crack tip stress field is strongly influenced by the residual stresses and a new parameter, R, is proposed to characterize the residual stress induced crack tip constraint. The results therefore suggest a three-parameter approach ( CTOD, Q and R) to characterize the crack tip stress field in the presence of residual stress where CTOD sets the size scale over which large stresses and large strains develop, and the geometry constraint parameter Q and the new residual stress induced constraint parameter R control the actual crack tip constraint level. For the cases analyzed, R is in general positive, which indicates that residual stress can enhance the crack tip constraint. However, the results also indicate that the R decreases towards zero and the effect of residual stress on crack tip constraint can be neglected when a full plastic condition is approached in the specimen.