In situ Raman study of mineral phases formed as by-products in a rotary kiln for clinker production

Portland clinker production consists essentially in the burning of material with defined composition in a rotary kiln at temperatures around 1450 °C. The main fuel used in this process is coal, even though in the last few years the use of alternative fuels has been increasing. Four main minerals are formed, namely, tricalcium and dicalcium silicate, tricalcium aluminate and tetracalcium aluminoferrite. Along with these main phases, variations in burning conditions of fuels or in the local composition of raw materials can lead to the formation of relatively high amounts of secondary by‐products, which can negatively affect the quality of the final material. Characterization of these by‐products allows not only optimization of the process of clinker production but also the design of special refractory materials for the wall of kilns and preheaters. Being found as particles included in (or alternating to) a hard solid clinker matrix, a detailed characterization of these extra phases could be achieved only via microscopic techniques. In this work, micro‐Raman spectroscopy has been successfully tested as a highly selective method for characterization and localization of included minerals that formed as overlapped crusts deposited on the internal wall of a conventional rotary kiln for cement production, without any manipulation of the sample. Understanding the chronological order of deposition of these overlapped layers is extremely important, as it is the only way to go back up to the production process and to individuate the problem. Copyright © 2008 John Wiley & Sons, Ltd.