Study of Air-Liquid Flow Patterns in Hydrocyclone Enhanced by Air Bubbles

In order to improve the oil‐water separation efficiency of a hydrocyclone, a new process utilizing air bubbles has been developed to enhance separation performance. Using the two‐component phase Doppler particle analyzer (PDPA) technique, the velocities of two phases, air and liquid, and air bubble diameter were measured in a hydrocyclone. The air‐liquid mixing pump can produce 15 to 60 μm‐diameter air bubbles in water. There is an optimum air‐liquid ratio for oil‐water separation of a hydrocyclone enhanced by air bubbles. An air core occurs in the hydrocyclone when the air‐liquid ratio is more than 1 %. The velocities of air bubbles have a similar flow pattern to the water phase. The axial and tangential velocity differences of the air bubbles at different air‐liquid ratio are greater near the wall and near the core of the hydrocyclone. The measured results show that the size distribution of the air bubbles produced by the air‐liquid mixing pump is beneficial to the process where air bubbles capture oil droplets in the hydrocyclone. These studies are helpful to understand the separation mechanism of a hydrocyclone enhanced by air bubbles. A new process utilizing air bubbles has been developed to enhance the oil‐water separation performance of a hydrocyclone. Using the two‐component phase Doppler particle analyzer (PDPA) technique, the velocities of two phases, air and liquid, and air bubble diameter were measured in the hydrocyclone.