Oxygen permeability of biaxially oriented polypropylene films

The effect of thermal history on the oxygen permeability of biaxially oriented polypropylene (BOPP) films was investigated. Compression‐molded sheets prepared with different cooling rates were biaxially oriented at several temperatures in the range between the onset of melting and the peak melting t...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Polymer engineering and science 2008-04, Vol.48 (4), p.642-648
Hauptverfasser: Lin, Y.J., Dias, P., Chen, H.Y., Chum, S., Hiltner, A., Baer, E.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The effect of thermal history on the oxygen permeability of biaxially oriented polypropylene (BOPP) films was investigated. Compression‐molded sheets prepared with different cooling rates were biaxially oriented at several temperatures in the range between the onset of melting and the peak melting temperature and at a strain rate similar to that encountered in a commercial film process. The stress response during stretching was found to depend on the residual crystallinity in the same way regardless of the thermal history of the compression‐molded sheet. Biaxial orientation reduced the oxygen permeability measured at 23°C; however, the reduction did not correlate with the amount of orientation as measured by birefringence or with the fraction of amorphous phase as determined by density. Rather, the decrease in permeability was attributed to reduced mobility of amorphous tie molecules. A single one‐to‐one correlation between the oxygen permeability and the intensity of the dynamic mechanical β‐relaxation was demonstrated for all the films used in the study. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers
ISSN:0032-3888
1548-2634
DOI:10.1002/pen.20988