The synergistic effect of κ-carrageenan and l-lysine on the 3D printability of yellow flesh peach gels: The importance of material elasticity in the printing process

This study investigated the effect of κ-carrageenan and l-lysine on the physical, chemical and textural properties of yellow flesh peaches and their suitability for 3D printing. The addition of κ-carrageenan and l-lysine was found to improve the apparent viscosity, elasticity, gel strength, and Young's modulus of the yellow flesh peach with κ-carrageenan and l-lysine gels (PCLG) and increase the minimum piston pressure required for 3D printing, thereby improving the printing performance. Optimum levels of κ-carrageenan and l-lysine (0.1 mmol/mL and 3.42 × 10 mmol/mL, respectively) were found to enhance mechanical strength, viscoelasticity and print fidelity. On the other hand, when the addition of κ-carrageenan is 0.1 mmol/mL, the addition of l-lysine causes an increase in the G value and a decrease in the η value of the PCLG according to Burger's model, indicating a transition from viscosity to elasticity and an increase in maximum extrusion force, while the apparent viscosity does not change significantly. The results of 3D printing showed that when the addition of κ-carrageenan and l-lysine reached 0.1 mmol/mL and 6.84 × 10 mmol/mL, respectively, the PCLG could not be smoothly extruded, indicating that elasticity also plays an important role during the extrusion process of the mixed gel.