Investigation into the impact of acetylene on performance and emission characteristics of a compression ignition engine using a blended biodiesel of ethanol and tamanu oil

Due to the significant increase in transportation, traditional fossil fuels utilised in internal combustion engines will only be accessible for a limited duration. Additionally, the harmful pollutants produced by these fuels, including CO, NO x , unburned hydrocarbons, smoke, and a small amount of particulate matter, have a severe negative impact on the environment. Although biodiesel proves efficient without necessitating engine modifications, its performance is hindered by its higher viscosity. Consequently, this research aims to enhance performance by introducing acetylene alongside tamanu methyl ester (biodiesel); however, this approach results in elevated NO x levels. To mitigate NO x emissions, a combination of ethanol and biodiesel is employed. This study investigates the performance and emission attributes of Acetylene + TME90E10 as the fuel. The combustion pressure and heat release rate of TME90E10 with 6 lpm, improved by 5.41% and 9.1% than diesel. When compared to regular diesel fuel, the introduction of 6 l per minute of acetylene with TME90E10 yields a substantial 24.4% decrease in hydrocarbon (HC) emissions. Furthermore, employing TME90E10 at the same acetylene flow rate demonstrates the lowest carbon monoxide (CO) emissions, registering at 0.07%, in contrast to the 0.13% emissions observed throughout the exhaust cycle when using pure diesel fuel.