A "convective" flow biofilter for the biofiltration of contaminants at sub-low concentrations
Biofiltration of contaminants at concentrations below a certain level (sub‐low concentrations) is not as effective as at higher concentrations, which leads to incomplete removal of the contaminants, because of diffusive mass transfer of the contaminants inside the biofilm and insufficient carbon and...
Gespeichert in:
Veröffentlicht in: | Remediation (New York, N.Y.) N.Y.), 2007-12, Vol.18 (1), p.95-107 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Biofiltration of contaminants at concentrations below a certain level (sub‐low concentrations) is not as effective as at higher concentrations, which leads to incomplete removal of the contaminants, because of diffusive mass transfer of the contaminants inside the biofilm and insufficient carbon and energy sources to sustain biomass growth and maintenance. To overcome the limitation of diffusion, this article proposes the concept of convective flow biofilm in which contaminated air flows through the porous biofilm and thus carries the carbon and energy sources to the biomass. The innovative concept of convective flow biofilm was implemented in a convective flow biofilter (CFB), which was built from activated carbon‐coated ceramic monoliths by selectively blocking the channel openings. The CFB was tested for 11 weeks for the biofiltration of toluene at inlet concentrations below 100 ppmv. The CFB performed consistently better than the conventional diffusive flow biofilter (DFB), as indicated by the higher removal efficiencies and the higher CO2 productions. The CFB demonstrated up to 30 percent higher removal efficiency and an up to 100 percent higher elimination capacity than the DFB. © 2007 Wiley Periodicals, Inc. |
---|---|
ISSN: | 1051-5658 1520-6831 |
DOI: | 10.1002/rem.20154 |