Rheological–dynamical analogy: Prediction of damping parameters of hysteresis damper

This research aims to predict the damping parameters of hysteresis damper based on an analytical rheological–dynamical (RDA) visco-elasto-plastic solution of one-dimensional longitudinal continuous vibrations of a bar. A visco-elasto-plastic bar or damper is an energy dissipation device. An attempt is made to estimate quantitatively the influence of material physical parameters of materials on the damping ratio in both the linear visco-elastic analysis and the nonlinear visco-elasto-plastic analysis of damper subjected to external vibration forces. Two types of damping are considered: viscous damping in the case of linear analysis, defined as stiffness and/or mass proportional and, in the case of nonlinear analysis, hysteresis damping caused by inelastic deformations of damper. Owing to the visco-elastic nature of the materials of the damper and the frequency dependence of the viscous damping ratio ξ, it is useful to consider separately the situations arising when ξ is positive (the system is stable) and when it is negative. A negative damping ratio means that the complementary solution of the response would not die away (the system is unstable because of factor e ξ · ω · t ). In the case of nonlinear analysis, the force–displacement relation is nonlinear, so it is very difficult to predict the actual damping and stiffness coefficients, even if the force–displacement characteristic is simply perfect elasto-plastic. Using the RDA method, which takes into account the rate of release of visco-elasto-plastic energy of the dissipation devices; nonlinear behaviors are linearized, enabling to obtain the equivalent damping and stiffness coefficients and the effective period for the damper.