Mercury removal from coal combustion by Fenton reactions – Part A: Bench-scale tests

This series of papers describes the development of technology to convert Hg(0) to Hg(II) in coal-derived flue gas based on the well-known Fenton reactions so that a Hg control strategy can be implemented in a wet scrubber. This effort consists of both bench-scale and pilot-scale work. This first paper reports on the bench-scale tests. The bench-scale results showed that Hg(0) oxidation can be achieved by the Fenton reactions and the oxidation rate is quantitatively dependent on the residence time of the Hg stream in the solution. An average of 75% oxidation of Hg(0) was achieved. Iron-based Fenton-type additives gave much more promising results compared to Cu-based Fenton-like additives for Hg(0) oxidation. The pH value of the sorbent solution also had a significant effect on the oxidation of Hg(0) and a suitable pH window was found to lie between 1.0 and 3.0 for this application. This may be attributed to the chain reaction mechanisms of Fe 3+/H 2O 2 for Fenton reactions, i.e., the decomposition of H 2O 2 for the production of OOH radicals in the Fe 3+/H 2O 2 system which is kinetically favoured under a wide range of conditions at pH values of 3 or less. At higher pH values, H 2O 2 is converted to H 2O instead of OOH radicals in the presence of Fe 3+.