Ag nanoparticles at p-Si/ MAPbI3 perovskite interface: improved photo responsivity and response speed in photodetection

Although enhanced performances of photovoltaic devices by embedding metal nanoparticals in charge transport layer, doping into active layer bulk, decorating the active layer surface, and inserting at the interface between semiconductor and the electrode were reported, the effect of incorporating metal NPs at the interface of single crystal semiconductor and perovskite is rarely tackled. Herein the effects of incorporating Ag nanoparticals (AgNPs) at p-Si/MAPbI3 perovskite interface on the photodiode performances were investigated. The results showed that compared with reference device (without AgNPs) the photoresponsivity of the device incorporating AgNPs is greatly improved with the exception for light with wavelengths fall in the spectral range where AgNPs have strong optical absorption. This effect is extremely significant for relatively shorter wavelengths in visible region, and a maximal improvement of around 10.6 times in photoresponsivity was achieved. The physical origin of the exception for spectral range that AgNPs have strong optical absorption is the cancelation of scatter resulted enhancement through AgNPs by band-to-band absorption resulted reduction of photocurrent, in which the generated electron has energy near the fermi level and the hole has large effective mass, which relax by nonradiative recombination, thus making not contribution to the photocurrent. More importantly, the AgNP decorated device showed much faster photo response speed than reference device, and a maximal improvement of around 7.9 times in rise and fall time was achieved. These findings provide a novel approach for high responsive and high speed detection for weak light.