Structure-dependent degradation of phthalate esters with persulfate oxidation activated by thermal in soil

Phthalate esters (PAEs) have become one of the most concerned emerging organic pollutants in the world, due to the toxicity to human health, and hard to remove it efficiently. In this study, the degradation performance of DBP and DEHP in the soil by water bath heating activated sodium persulfate (PS) method under different factors were studied, in which the degradation rate of DBP and DEHP were improved with the increasing of temperature, PS concentration and water/soil ratio, and higher diffusion efficiency treatments methods, due to the improved mass transfer from organic phase to aqueous media. However, the degradation rate of DEHP was much lower than that of DBP, because DEHP in the soil was more difficult to contact with SO4•− for reaction on soil surface, and the degradation rate of PAEs in soil was significantly lower than that in water. Redundancy analysis of degradation rate of DBP and DEHP in water demonstrated that the key factors that determine the degradation rate is time for DBP, and cosolvent dosage for DEHP, indicating that the solubility and diffusion rate of PAEs from soil to aqueous are predominance function. This study provides comprehensive scenes in PAEs degradation with persulfate oxidation activated by thermal in soil, reveal the difference of degradation between DBP and DEHP is structure-dependent. So that we provide fundamental understanding and theoretical operation for subsequent filed treatment of various structural emerging pollutants PAEs contaminated soil with thermal activated persulfate. [Display omitted] •DBP could be degraded efficiently by thermal activated sodium persulfate.•DEHP maintains a low degradation rate due to its poor diffusion ability.•The rate-limiting step of long chain PAEs is the diffusion rate.•Appropriate addition of cosolvent is helpful to DEHP degradation.