Reevaluating the accuracy and specificity of EDTA-based polyphosphate quantification method

Feng et al. (2020) developed a simple, nondestructive, and cost-effective method to quantify polyphosphate (poly-P) in poly-P-accumulating organism (PAO)-enriched sludge samples through 30-h anaerobic exposure to 1 % (w/v) ethylenediaminetetraacetic acid (EDTA). This study optimized the N/P ratio (∼2) of the PAO culture medium in order to provide excess P for poly-P formation in PAO cells. Subsequently, the fluorescence microscopic observation of stained cells confirmed that Corynebacterium glutamicum was a PAO species capable of heterotrophic nitrification. Finally, this study reevaluated the accuracy and specificity of the EDTA-based quantification method, using two confirmed PAO biomass, three confirmed non-PAO biomass, and two sludge samples. The 1 % (w/v) EDTA treatment appears destructive to non-PAO cells, causes the release of other P forms, and is not effective for all PAO species. Under the conditions, the actual P release amount should be calculated by subtracting approximately 8 mg P g−1 total suspended solids from the determination. The amounts of P released from sludge samples was determined not only by the PAO fractions described by Feng et al. but also by PAO community structure and sludge P content. [Display omitted] •It led to underestimation (relative to PAO) or overestimation (relative to non-PAO) of P release.•It can be conducted using simpler classic anaerobic methods.•PAO community structure and sludge P content also determine the P release amount from sludge.