Performance Improvement for the CuCrZr Alloy Produced by Laser Powder Bed Fusion Using the Remelting Process

Owing to the high optical reflectivity of copper powder, the high-performance fabrication of copper alloys in the laser additive manufacturing (AM) field is problematic. To tackle this issue, this study employs the remelting process during laser powder bed fusion AM to fabricate defect-free and high-performance CuCrZr alloy. Compared to the non-remelting process, the remelting process yields finer grains, smaller precipitates, denser dislocations, and smaller dislocation cells. It realizes not only the dense molding of high laser reflectivity powders but also excellent mechanical properties and electrical conductivity (with an ultimate tensile strength of 329 MPa and conductivity of 96% IACS) without post-heat treatment. Furthermore, this study elucidates the influence of complex thermal gradients and multiple thermal cycles on the manufacturing process under the remelting process, as well as the internal mechanisms of microstructure evolution and performance improvement.