A Way to Improve the Accuracy of Hobbed Involute Gears

Involute gears are widely used in the design of machines and mechanisms. Performance of gear transmissions, e.g., performance of automobile transmissions, strongly depends upon the accuracy of gears of which the transmission is comprised. The higher the gear accuracy, the higher performance of the gear transmission observed. An increase of accuracy of involute gears reduces vibration of the transmission, and causes lower noise excitation. A significant amount of gears for the needs of the automotive industry is manufactured by hobbing. Reported in this paper is a way to improve the accuracy of hobbed involute gears that requires an appropriate alteration of design parameters of the hob to be applied. The required correction of design parameters of the hob can be computed on the premises of in-depth analysis of kinematic geometry of meshing of the hob and of the work gear, i.e., of design parameters of the hob, as well as an analysis of kinematics of meshing of the gear work and of the hob. An analytical approach for computation of the required alterations in design parameters of the involute hob is reported in the paper. Using commercial software MathCAD/Scientific, numerous computer codes are developed for performing the necessary computations. A numerical example of computation is presented. The reported results of research are ready to put into production.