Arsenic removal by reverse osmosis

Arsenic is widely distributed in nature in air, water and soil. Acute and chronic arsenic exposure via drinking water has been reported in many countries, especially Argentina, Bangladesh, India, Mexico, Mongolia, Thailand and Taiwan, where a large proportion of ground water is contaminated with arsenic at levels from 100 to over 2,000 micrograms per liter (ppb). Public health standards of maximum of 50 ppb have been adopted by the US and World Health Organization in the 1970s and the 80s. Carcinogenicity and genotoxicity led to the WHO recommendation of 10 ppb maximum level in 1993, followed by the US adoption of the same in 2001, with the US estimate that 5% of all US community water systems will have to take corrective actions to lower the current levels of arsenic in their drinking water. In high arsenic areas of the world, the need for better water treatment and resulting economic impact would be even greater. In this article, we briefly review the geochemistry, natural distribution, regulation, anthropogenic sources and removal mechanisms of arsenic, pointing especially to the promise of reverse osmosis (RO) as a practical means of purification. We conclude that arsenic in the commonly high oxidation states of (V) is very effectively removed by RO. With further attention to the removal of the weakly acidic arsenic (III) species in waters by the operation of RO at sufficiently high pHs made possible by the newer antiscalants, practical processes can be developed with RO to remove all major species of arsenic from water. Further studies are needed in the characterization of the arsenic species being treated and in the design of the RO process to match the demands.