Betavoltaic and photovoltaic energy conversion in three-dimensional macroporous silicon diodes

A three‐dimensional p–n diode structure is presented for the generation of energy via photovoltaic and betavoltaic modes of operation. Macroporous Silicon (MPS) has a large degree of internal surface area and its vertically oriented pores, which extend deep into the bulk of the Si substrate, allow for the creation of three‐dimensional structures. In this device the MPS will not only serve as a means for creating 3D diode structures, it will also serve as a host matrix for a tritium isotope which emits energetic beta particles. By varying electrochemical etching conditions and using a prepatterning technique, 1.1 μm diameter pores with a spacing of 2.5 μm were achieved. The p–n junction was created using a rapid thermal process (RTP) which relies on the diffusion from an n‐type solid source into the MPS. To ensure the quality of the diode structure, devices were tested using a light source which resulted in a photovoltaic response. Finally, betavoltaic operation was demonstrated by exposing devices to a tritium gas source. The average energy conversion efficiency of the first generation 3D diode was one order of magnitude higher than that of a similar planar device. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)