Neutron dose and power released by the JCO criticality accident in Tokai-mura
There was no monitor and no instrumentation to measure neutrons in the JCO facilities when the criticality accident began. Two neutron monitoring posts located at 1.7 and 2.0 km from the JCO site, however, recorded the process of the criticality accident from its beginning. Through the analysis of t...
Gespeichert in:
Veröffentlicht in: | Journal of environmental radioactivity 2000-01, Vol.50 (1), p.15-20 |
---|---|
1. Verfasser: | |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | There was no monitor and no instrumentation to measure neutrons in the JCO facilities when the criticality accident began. Two neutron monitoring posts located at 1.7 and 2.0
km from the JCO site, however, recorded the process of the criticality accident from its beginning. Through the analysis of the monitoring data, neutron doses of 0.096 and 0.014
μSv were evaluated at 1.7 and 2.0
km, respectively. Neutron transport in air-over-ground geometry was calculated to over 2
km from the building where the criticality accident took place, assuming simple models for shielding. The neutron dose calculated at 1
m above ground was fitted to the measured data. The distances corresponding to neutron doses of 1, 0.1, 0.01 and 0.001
mSv were about 450, 700, 1000 and 1300
m, respectively. The neutron dose at 100
m was estimated to have been 81
mSv. The total power released by the accident was estimated to have been about 17
kWh corresponding to 1.9×10
18 fissions of
235
U
. |
---|---|
ISSN: | 0265-931X 1879-1700 |
DOI: | 10.1016/S0265-931X(00)00055-2 |