Development of an effective cleaning technique and ancillary analytical method for estimation of residues of selected kinase inhibitors from stainless steel and glass surfaces by swab sampling

Importance of cleaning validation in the pharmaceutical industry cannot be overstated. It is essential for preventing cross-contamination, ensuring product quality & safety, and upholding regulatory standards. The present study involved development of an effective cleaning method for five select...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of pharmaceutical and biomedical analysis 2024-05, Vol.242, p.116024-116024, Article 116024
Hauptverfasser: Borale, Vishal Vasant, Rajput, Niraj, Jadav, Tarang, Dhakne, Pooja, Pillai, Megha, Sharma, Nitish, Sengupta, Pinaki
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Importance of cleaning validation in the pharmaceutical industry cannot be overstated. It is essential for preventing cross-contamination, ensuring product quality & safety, and upholding regulatory standards. The present study involved development of an effective cleaning method for five selected kinase inhibitors binimetinib (BMT), selumetinib (SMT), brigatinib (BGT), capmatinib (CPT), and baricitinib (BRT). For checking the effectiveness of the developed cleaning technique, a sensitive and specific RP-HPLC based analytical method employing a diode array detector has been established to quantitate drug residue on glass and stainless steel surfaces. A reproducible swab sampling protocol utilizing TX714A Alpha swabs wetted with an extracting solvent has been developed to collect representative samples from both surfaces. Chromatographic separation of selected kinase inhibitors was achieved in gradient mode using an Agilent Zorbax eclipsed C18 column with acetonitrile and 10 mM ammonium formate as the mobile phase. The analytes were chromatographically separated in a 12 min run time. The mean swab recovery for each drug from glass and stainless steel surfaces exceeded 90%. Cleaning with IPA (70%) and acetone (70%) effectively removed residues for all five drugs. A solution comprising 10 mM SDS with 20% IPA demonstrated good efficacy in cleaning residues of BGT, BRT, and CPT, but exhibited lower efficacy for SMT and BMT. •Developed a cleaning technique for removing SKIs residues from SS and glass surface.•An accurate (recovery > 90%) and precise (RSD > 10%) swab sampling protocol was developed using TX714A-Alpha swabs.•70% IPA and 70% acetone had an effective (≈100%) residue removal capability.•Enough specificity, linearity (r2 ≥ 0.999), LOD and LOQ in ng/mL range was achieved for all SKIs.
ISSN:0731-7085
1873-264X
DOI:10.1016/j.jpba.2024.116024