Microstructure and Mechanical Properties of the Stainless Steels Obtained by Sintering Mixtures of AISI 316L and Silicon Powders

Microstructure and Mechanical Properties of the Stainless Steels Obtained by Sintering Mixtures of AISI 316L and Silicon Powders

The aim of the study was to obtain a ferritic-austenitic stainless steel through sintering of the mixture of austenitic steel AISI 316L powders with silicon in the amount ranging from 1 to 7%. The pressed mixtures were sintered at 1240oC for 60 minutes under hydrogen atmosphere. The results of the s...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Materials science forum 2006-01, Vol.513, p.35-50
Hauptverfasser: Sikorski, K., Szymańska, Agnieszka, Kazior, Jan, Sekuła, M., Kurzydlowski, Krzysztof Jan, Kowalczyk, D.
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The aim of the study was to obtain a ferritic-austenitic stainless steel through sintering of the mixture of austenitic steel AISI 316L powders with silicon in the amount ranging from 1 to 7%. The pressed mixtures were sintered at 1240oC for 60 minutes under hydrogen atmosphere. The results of the silicon admixture on the density, porosity, microstructure and mechanical properties of the sintered specimens are discussed.
ISSN:0255-5476
1662-9752
1662-9752
DOI:10.4028/www.scientific.net/MSF.513.35