Household mixed plastic waste derived adsorbents for CO2 capture: A feasibility study

The feasibility of producing activated carbon (AC) from real Household Mixed Plastic Waste (HMPW) comprising of LDPE, HDPE, PP, PS, and PET for carbon capture via direct carbonisation followed by microwave-assisted or conventional thermally assisted chemical activation was investigated. A microwave-assisted activation procedure was adopted to assess the impact on the CO2 capture capacity of the resulting AC using both a lower temperature (400 °C vs. 700 °C) and a shorter duration (5 vs. 120 mins) than that required for conventional activation. The results obtained showed that the AC yield was 71 and 78% for the conventional and microwave-assisted samples, respectively. Microwave activation consumed five-fold less energy (0.19 kWh) than the conventional activation (0.98 kWh). Thermal stability results indicated total weight loss of 10.0 and 8.3 wt%, respectively, for conventional and microwave-activated samples over the temperature range of 25–1000 °C, with ACs from both activation routes displaying a type 1 nitrogen isotherm. The dynamic CO2 uptake capacity at 1 bar and 25 °C was 1.53 mmol/g, with maximum equilibrium uptake ranging between 1.32 and 2.39 mmol/g at temperatures (0–50 °C) and 1 bar for the conventionally activated AC. The analogous microwave-activated sample showed a higher dynamic CO2 uptake of 1.62 mmol/g and equilibrium uptake in the range 1.58–2.88 mmol/g under equivalent conditions. The results therefore indicate that microwave activation results in enhanced carbon capture potential. To the best of our knowledge, this is the first-time microwave heating has been employed to convert household mixed plastic wastes directly into ACs for carbon capture applications. This report therefore demonstrates that the management of mixed plastics could lead to the development of a circular economy through the conversion of waste into value-added materials. [Display omitted] •A feasible method of utilising household mixed plastic waste is proposed.•Mixed plastic waste shows potential as a low-cost carbon precursor for CO2 adsorbent production.•Activated carbons derived from Household Mixed Plastics demonstrate excellent CO2 capture performance.•Microwave activation enhanced the carbon capture potential whilst decreasing energy input.