Application of starch-rich mango by-product as filler for the development of an additive manufacturing filament compound

The surge in global polymeric waste underscores the imperative for biodegradable materials to substitute traditional polymers. Crucially, advancements are needed for emerging technologies like Materials Extrusion (ME) in additive manufacturing, where current biodegradable materials exhibit limitations. This work was based on the development of a biodegradable composite filament. The inner of the mango seed (kernel) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were used as raw materials. The properties of PHBV and mango by-product mixture were first evaluated by direct-extrusion printing. Then, the feasibility of manufacturing the filaments was studied. Initially, the kernel seed mango was characterized thermally, chemically, and morphologically by DSC, FTIR, and SEM, respectively. It was observed that the addition of mango by-product contributed to the decrease of PHBV crystallinity, resulting in the reduction of printed parts retraction and increases the Tg, as shown by the DMA. The structure of the native starch was preserved due to non-gelatinization, even after processing steps, as indicated by thermal, chemical, and morphological analyses. Finally, PHBV filaments containing mango by-products were fabricated, and prototypes were manufactured by ME to demonstrate the potential for market acceptance and commercialization of the studied filament.