Utilizing different types of biomass materials to modify steel slag for the preparation of composite materials used in the adsorption and solidification of Pb in solutions and soil

This study utilized discarded steel slag (SS) as raw material and prepared modified steel slag materials (SS-SBC, SS-NBC, SS-BHA) through modification with biomass materials such as straw biochar (SBC), nutshell biochar (NBC), and biochemical humic acid (BHA). These materials were then applied for the removal of Pb from both solution and soil. The physical and chemical properties of the materials were analyzed using characterization techniques such as SEM, EDS, XRD, and BET. The specific surface area of the modified materials increased from the original 3.8584 m2/g to 34.7133 m2/g, 181.7329 m2/g, and 7.7384 m2/g, respectively. The study then explored the influence of different adsorption conditions on the adsorption capacity of Pb in solution, determining the optimal conditions as follows: initial concentration of 200 mg/L, adsorbent mass of 0.04 g, temperature of 15 °C, and pH = 2. To further investigate the adsorption process, kinetic and isotherm models were established. The results indicated that the adsorption process for all three materials followed a pseudo-second-order kinetic model and Freundlich isotherm model, suggesting a multi-layer chemical adsorption. Thermodynamic analysis revealed that the adsorption process was an exothermic spontaneous reaction. Soil cultivation experiments were conducted to explore the effects of different material addition amounts and cultivation times on the passivation of Pb-polluted soil. Analysis of heavy metal forms in the soil revealed that the addition of modified materials reduced the acid-extractable form of Pb in the soil and increased the residual form, which is beneficial for reducing the migration of Pb in the soil. FT-IR and XPS analyses were employed to study the functional groups, element composition, and valence states before and after adsorption passivation of Pb by the three materials. The results confirmed that the adsorption mechanisms of SS-SBC, SS-NBC, and SS-BHA mainly involved electrostatic adsorption, ion and ligand exchange, and surface precipitation. This study not only provides a new material for adsorbing and immobilizing heavy metals in soil and water but also offers a new approach for the resource utilization of steel slag waste. [Display omitted] •Using biomass materials as modifiers to prepare SSBC.•Compared the adsorption effects of different biomass materials on SSBC.•Studied the passivation effect and distribution forms of Pb in soil by SSBC.•Proposed the adsorption passivation mech