Effect of pilot-guided implant placement concept on the accuracy of osteotomy preparation and implant placement

Purpose: To evaluate the accuracy of osteotomy preparation and implant placement for 3 pilot-guided (PG) concepts, namely, a surgical template with a metal sleeve (MS), a surgical template with an in-built nonmetal sleeve (NMS), and a surgical template with an in-built nonmetal sleeve for round bur indentation (RB).Methods: Surgical models with missing maxillary molars were studied. The MS templates were designed to accept metal sleeves, while the NMS and RB templates were designed with in-built nonmetal sleeves. Ten templates were tested per group (n = 10). After each step (pilot drilling, 2nd drilling, 3rd drilling, profiling, and implant placement), the surgical model was scanned and compared against the planning model to determine maximum horizontal deviation (MHD) and maximum angle deviation (MAD).Results: The MS and NMS templates exhibited a similar increase in MHD with successive drilling steps. The MAD for the pilot drilling step was significantly lower for MS than for the other groups. However, the differences among groups for MHD and MAD diminished in later steps. All templates had an MHD of 1.0 mm or less and an MAD less than 8°.Conclusion: The investigated PG implant placement concepts resulted in similar deviations in the placed implants.