An eco-friendly hydroentangled cotton non-woven membrane with alginate hydrogel for water filtration

Alginate hydrogel is highly efficient for water filtration due to its anti-fouling nature and formation of strong hydration membranes. However, poor mechanical properties of alginate hydrogel membrane limit its installation in water treatment. There is a need to enhance mechanical properties of alginate hydrogel membranes using eco-friendly, cost-effective materials and technologies. In this work, hydroentangled non-woven from cotton waste (comber noil) fibers was prepared. This non-woven was immersed in solution of sodium alginate (0.5 %, 1 %, 1.5 %) followed by dipping in calcium chloride solution which resulted in gel formation on and into cotton fibers. The successful formation of gel on non-woven fabric was confirmed through FTIR (Fourier transform infrared spectroscopy) and properties of this composite membrane were analyzed by SEM (Scanning electron microscopy), XRD (X-ray diffraction), DSC (Differential scanning calorimeter), water contact, water flux, oil-water filtration, air permeability, tensile strength, and porosity tests. The results showed that porosity of prepared hydrogel membranes decreased with increasing alginate concentration from 0.5 % to 1.5 % which resulted in decreased water permeation flux from 2655 h /m to 475 h /m . The prepared membrane has separation efficiencies for the oil-water mixture in the range of 97.5 % to 99.5 %. Moreover, the developed samples also showed significant antibacterial activity as well as improved mechanical properties. The strength of the prepared membrane is in the range of 40 N to 80 N. The developed sodium alginate hydrogel-based non-woven membrane could have potential applications for commercial water filtration systems.