Highly Precise Laser-Induced Breakdown Spectroscopy Analysis of Major Mineral Nutrients in Edible Salts Using Miniaturized Salt Ponds and Alternating Laser-Ablation Data Sampling

In this work, we applied a hydrophilicity-enhanced solid substrate and an alternating laser-ablation data sampling (ALADS) scheme to improve laser-induced breakdown spectroscopy (LIBS) measurement precision and demonstrated the performance in analyzing K, Mg, Ca, and S contained in commercially avai...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied spectroscopy 2023-12, Vol.77 (12), p.1351-1361
Hauptverfasser: Park, Jeong, Han, Song-Hee, Nam, Sang-Ho, Lee, Yonghoon
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In this work, we applied a hydrophilicity-enhanced solid substrate and an alternating laser-ablation data sampling (ALADS) scheme to improve laser-induced breakdown spectroscopy (LIBS) measurement precision and demonstrated the performance in analyzing K, Mg, Ca, and S contained in commercially available edible salt products. Five edible salt products from Australia, Bolivia, France, and South Korea were dissolved in water and a tiny volume of each solution was dropped on the solid substrate, that is, a miniaturized salt pond. After being dried, the residual salt crystals distributed still inhomogeneously, but the homogeneity could be significantly improved in comparison with that from typical drop-and-dry methods. The ALADS scheme was applied to extract three precise measurements from 9798 single-shot LIBS spectra covering the entire salt pond. The measurements obtained by ALADS were found to agree well with one another regardless of the inhomogeneous distribution of salt crystals. As a result, the measurement precision was proved remarkably. Limits of detection for K, Mg, Ca, and S were estimated to be 0.64, 1.7, 14, and 530 mg/kg, respectively, which are enough to analyze those elements contained in salts typically at the level of 100 parts per million (ppm) to ∼3 wt% for the purpose of salt quality assessment. Graphical abstract This is a visual representation of the abstract.
ISSN:0003-7028
1943-3530
DOI:10.1177/00037028231206195