Thin-film magnetic head using impedance change at high frequency

This article reports on the reproducing characteristics of a new type of thin-film magnetic head, which is based on impedance change due to field dependent permeability at a frequency of several MHz. The head is flux responsive, and a field from a medium is perceived as an amplitude modulation of an...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on magnetics 1995-11, Vol.31 (6), p.2709-2711
Hauptverfasser: Senda, M., Takei, K., Ishii, O., Koshimoto, Y.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This article reports on the reproducing characteristics of a new type of thin-film magnetic head, which is based on impedance change due to field dependent permeability at a frequency of several MHz. The head is flux responsive, and a field from a medium is perceived as an amplitude modulation of an AC carrier voltage and reproduced by detection. In order to obtain a large change, the head element is composed of magnetic core/sensing lead/magnetic core sandwich structure, and a NiFe/SiO/sub 2/ multilayer film is adopted for the cores. The lead is also used for a DC bias. A single pole type head and a ring type head, both with this simple core/lead/core structure, were examined for two fundamental operations, and were confirmed to exhibit a differential waveform and an integral waveform, respectively.
ISSN:0018-9464
1941-0069
DOI:10.1109/20.490100