Superconducting toroid design for the ATLAS experiment at LHC

Superconducting toroid design for the ATLAS experiment at LHC

The ATLAS Experiment proposed for LHC will use toroidal magnet systems to achieve high muon momentum resolution. The proposal is based on an air-cored superconducting toroid magnet system consisting of a long barrel toroid with a pair of end cap toroids to provide high resolution at large rapidity....

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE Transactions on Magnetics 1994-07, Vol.30 (4), p.1819-1822
Hauptverfasser: Baynham, D.E., Coombs, R.C., Holtom, E., Walters, C.R.
Format: Artikel
Sprache:eng
Schlagworte:
ACCELERATORS
Applied sciences
Collaboration
Cryogenics
DESIGN
Detectors
Electrical engineering. Electrical power engineering
Electromagnets
Exact sciences and technology
Geometry
INSTRUMENTATION, INCLUDING NUCLEAR AND PARTICLE DETECTORS
Large Hadron Collider
Mesons
MUONS
PARTICLE ACCELERATORS
PARTICLE IDENTIFICATION
Proposals
RADIATION DETECTORS
Superconducting coils
SUPERCONDUCTING MAGNETS
Toroidal magnetic fields
Various equipment and components
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The ATLAS Experiment proposed for LHC will use toroidal magnet systems to achieve high muon momentum resolution. The proposal is based on an air-cored superconducting toroid magnet system consisting of a long barrel toroid with a pair of end cap toroids to provide high resolution at large rapidity. Each end cap toroid will have an outer diameter of approximately 11 m and an axial length of 5 m and will provide field integrals in the range 4-8 Tm over the rapidity span /spl eta/=1.5-2.8. This paper presents the magnetic, mechanical and cryogenic design of the end cap toroid magnet systems.< >
ISSN:0018-9464
1941-0069
DOI:10.1109/20.305616