Microstructure and mechanical properties of Inconel 718 electron beam welds

Bead on plate, full penetration electron beam welds were produced in 2 mm thickness sheets of Inconel 718 in the solution treated condition. Welds were subjected to an aging treatment with and without post-weld solution treatment. Weld microstructures, high temperature tensile properties and stress...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Materials science and technology 2005-10, Vol.21 (10), p.1132-1138
Hauptverfasser: Ram, G D Janaki, Reddy, A Venugopal, Rao, K Prasad, Reddy, G Madhusudhan
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Bead on plate, full penetration electron beam welds were produced in 2 mm thickness sheets of Inconel 718 in the solution treated condition. Welds were subjected to an aging treatment with and without post-weld solution treatment. Weld microstructures, high temperature tensile properties and stress rupture properties were evaluated. The as welded fusion zone showed a considerable amount of interdendritic niobium segregation and brittle intermetallic Laves phase. The tensile and stress rupture properties of the welds after post-weld aging treatment were found to be inferior in relation to the base metal. Post-weld solution treatment at 980DGC was found to result in partial dissolution of Laves phase, some reduction in niobium segregation and the formation of 5 phase needles around the Laves particles. The use of 980DGC solution treatment was found to improve the weld properties to some extent, although not to the level of the base metal. The reasons for this behaviour are discussed, correlating microstructures, fracture features and mechanical properties.
ISSN:0267-0836
DOI:10.1179/174328405X6226o