Constitutive modeling and the trousers test for fracture of rubber-like materials

The classical constitutive modeling of incompressible hyperelastic materials such as vulcanized rubber involves strain–energy densities that depend on the first two invariants of the strain tensor. The most well-known of these is the Mooney–Rivlin model and its specialization to the neo-Hookean form. While each of these models accurately predicts the mechanical behavior of rubber at moderate stretches, they fail to reflect the severe strain-stiffening and effects of limiting chain extensibility observed in experiments at large stretch. In recent years, several constitutive models that capture the effects of limiting chain extensibility have been proposed. Here we confine attention to two such phenomenological models. The first, proposed by Gent in 1996, depends only on the first invariant and involves just two material parameters. Its mathematical simplicity has facilitated the analytic solution of a wide variety of basic boundary-value problems. A modification of this model that reflects dependence on the second invariant has been proposed recently by Horgan and Saccomandi. Here we discuss the stress response of the Gent and HS models for some homogeneous deformations and apply the results to the fracture of rubber-like materials. Attention is focused on a particular fracture test, namely the trousers test where two legs of a cut specimen are pulled horizontally apart. It is shown that the cut position plays a key role in the fracture analysis, and that the effect of the cut position depends crucially on the constitutive model employed. For stiff rubber-like or biological materials, it is shown that the influence of the cut position is diminished. In fact, for linearly elastic materials, the critical driving force for fracture is independent of the cut position. It is also shown that the limiting chain extensibility models predict finite fracture toughness as the cut position approaches the edge of the specimen whereas classical hyperelastic models predict unbounded toughness in this limit. The results are relevant to the structural integrity of rubber components such as vibration isolators, vehicle tires, earthquake bearings, seals and flexible joints.