Weld shape comparison with iron oxide flux and Ar-O2 shielding gas in gas tungsten arc welding

The influence of iron oxide flux and O 2 -Ar mixed shielding gas on weld shape and penetration in gas tungsten arc welding is investigated by bead-on-plate welding on SUS 304 stainless with low oxygen and low sulphur contents. The oxygen content in the weld metal is measured using a HORIBA EMGA-520 oxygen/nitrogen analyzer. The results show that both the iron oxide flux and the O 2 -Ar mixed shielding gas can significantly modify the weld shape from shallow wide to deep narrow. A large weld depth/width ratio around of 0.5 is obtained when the oxygen content in the shielding gas is in the range of 3000-6000 vol. ppm. Oxygen over a certain critical value, i.e. 70 wt. ppm, in the weld pool alters the temperature coefficient of the surface tension on the pool surface, and hence changes the Marangoni convection. A thick oxide layer on the weld pool surface is generated when the oxygen content in the shielding gas is over 6000 vol. ppm, which becomes a barrier for the oxygen conveyance to the liquid pool and prevents the liquid pool from freely moving, and therefore, decreases the intensity of the Marangoni convection on the pool surface.