Thermal spray vitrification process for the removal of lead-based paint from steel structures: An applications note

Lead-based paints and primers have long been used to protect steel structures from corrosion, but are now recognized as environmental hazards. During lead-based paint removal via abrasive blasting, federal, state and local environmental requirements mandate the use of containment structures to preve...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of thermal spray technology 2004-03, Vol.13 (1), p.121-125
Hauptverfasser: KUMAR, A, BOY, J, STEPHENSON, L. D
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Lead-based paints and primers have long been used to protect steel structures from corrosion, but are now recognized as environmental hazards. During lead-based paint removal via abrasive blasting, federal, state and local environmental requirements mandate the use of containment structures to prevent contamination of air, soil, or water. The thermal spray vitrification (TSV) process was developed and optimized in laboratory experiments to remove hazardous lead-based paint. TSV consists of thermal spraying a molten glass onto the painted surface. As the glass strikes the substrate, it reacts with the paint, and organic components are pyrolyzed, while lead ions are trapped on the glass surface. Quenching stresses in the glass cause it to crack and spall off the substrate. The resulting glass fragments are collected, and further remelted to completely immobilize lead (Pb) ions in the glassy iron (Fe) silicate matrix. The glass waste is thus rendered non-hazardous, as determined by the Toxicity Characteristic Leaching Procedure (TCLP). The TSV process was field tested on a fire hydrant, using minimal personal protective equipment and without using a containment structure. The lead-containing paint was removed, without producing hazardous waste, leaving de-painted surfaces suitable for repainting.
ISSN:1059-9630
1544-1016
DOI:10.1007/s11666-004-0056-0