Optical reflection characteristic-based emissivity analysis of a pyramid array flat-plate blackbody for remote sensor calibration

The flat-plate blackbody (FPB) is the core device in infrared remote sensing radiometric calibration for providing accurate infrared radiation energy. The emissivity of an FPB is an important parameter that directly affects calibration accuracy. This paper uses a pyramid array structure based on the regulated optical reflection characteristics to analyze the FPB's emissivity quantitatively. The analysis is accomplished by performing emissivity simulations based on the Monte Carlo method. The effects of specular reflection (SR), near-specular reflection (NSR), and diffuse reflection (DR) on the emissivity of an FPB with pyramid arrays are analyzed. In addition, various patterns of normal emissivity, small-angle directional emissivity, and emissivity uniformity are examined under different reflection characteristics. Further, the blackbodies with the NSR and DR are fabricated and tested experimentally. The experimental results show a good agreement with the corresponding simulation results. The emissivity of the FPB with the NSR can reach 0.996 in the 8-14 µm waveband. Finally, the emissivity uniformity of FPB samples at all tested positions and angles is better than 0.005 and 0.002, respectively. The standard uncertainty of experimental measurement of waveband emissivity and spectral emissivity are 0.47% and 0.38% respectively, and the simulation uncertainty is 0.10%.