Distributions of trace elements within MSWI bottom and combined ash components: Implications for reuse practices

Concentrations of 25 inorganic elements were measured in both bulk ash and individual ash components from residuals at three municipal solid waste incineration (MSWI) facilities in the US (two combined ash (CA) and one bottom ash (BA)). Concentrations were assessed based on particle size and component to understand the contribution from each fraction. The results found that among facilities, the finer size fractions contained elevated concentrations of trace elements of concern (As, Pb, Sb) when compared to the coarse fraction, but concentrations varied among facilities depending on the type of ash and differences in advanced metals recovery processes. This study focused on several constituents of potential concern, As, Ba, Cu, Pb, and Sb, and found that the main components of MSWI ash (glass, ceramic, concrete, and slag) are sources of these elements in the ash streams. For many elements, concentrations were significantly higher in CA bulk and component fractions opposed to BA streams. An acid treatment procedure and scanning electron microscopy/energy-dispersive x-ray spectroscopy analysis revealed that some elements, such as As in concrete, are result of the inherent properties of the component, but other elements, such as Sb, form on the surface during or after incineration and can be removed. Some Pb and Cu concentrations were attributed to inclusions in the glass or slag introduced into the material during the incineration process. Understanding the contributions of each ash component provides critical information for developing strategies to reduce trace element concentrations in ash streams to promote reuse opportunities. [Display omitted] •Trace element concentrations determined for individual components of incineration ash.•Glass, ceramic, concrete, and slag are sources of trace element concentrations.•As, Ba, and Sb attributed to surface products formed pre- and post-incineration.•Pb and Cu embed in glass or slag due to phase changes during incineration process.•Pre- or post-processing of MSWI ash could decrease trace element concentration.