Nonaqueous foam stabilization mechanisms in the presence of volatile solvents

Hypothesis Nonaqueous foams are found in a variety of applications, many of which contain volatile components that need to be removed during processing. Sparging air bubbles into the liquid can be used to aid in their removal, but the resulting foam can be stabilized or destabilized by several diffe...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of colloid and interface science 2023-10, Vol.648, p.46-55
Hauptverfasser: Lombardi, Lorenzo, Roig-Sanchez, Soledad, Bapat, Amar, Frostad, John M.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Hypothesis Nonaqueous foams are found in a variety of applications, many of which contain volatile components that need to be removed during processing. Sparging air bubbles into the liquid can be used to aid in their removal, but the resulting foam can be stabilized or destabilized by several different mechanisms, the relative importance of which are not yet fully understood. Investigating the dynamics of thin film drainage, four competing mechanisms can be observed, such as solvent evaporation, film viscosification, and thermal and solutocapillary Marangoni flows. Experiments Experimental studies with isolated bubbles and/or bulk foams are needed to strengthen the fundamental knowledge of these systems. This paper presents interferometric measurements of the dynamic evolution of a film formed by a bubble rising to an air-liquid interface to shed light on this situation. Two different solvents with different degrees of volatility were investigated to reveal both qualitative and quantitative details on thin film drainage mechanisms in polymer-volatile mixtures. Findings Using interferometry, we found evidence that solvent evaporation and film viscosification both strongly influence the stability of interface. These findings were corroborated by comparison with bulk foam measurements, revealing a strong correlation between these two systems.
ISSN:0021-9797
1095-7103
DOI:10.1016/j.jcis.2023.05.156