Adsorption of antibiotics on different microplastics (MPs): Behavior and mechanism

MPs can adsorb antibiotics to coexist and accumulate in the aquatic environment in the form of complexes, resulting in unforeseeable adverse consequences. The adsorption behavior and mechanism of three antibiotics amoxicillin (AMX), ciprofloxacin (CIP), and tetracycline (TC) by four MPs Polyvinyl chloride (PVC), polystyrene (PS), polypropylene (PP), and polyethylene (PE) were studied. Results showed that the adsorption of antibiotics onto MPs follows the pseudo-second-order kinetic and the Freundlich isotherm model, indicating a multilayer chemical adsorption. Combined with FTIR, XRD, and SEM analyses, the adsorption behavior was simultaneously governed by physical processes. Additionally, the equilibrium adsorption capacity was inhibited in the research concentration range of NaCl from 10 mg/L to 10 g/L. The higher the salt concentration, the more pronounced the inhibition phenomenon was. The high (9) and low (3) pH also inhibited the adsorption of antibiotics to MPs. The humic acid (HA) concentration in the range of 0–20 mg/L generally inhibited the MPs-antibiotics adsorption, but the higher HA concentration showed less inhabitation than the lower one. The adsorption inhibition of TC on the four MPs by SA also followed the above rule. However, the adsorption inhibition of sodium alginate (SA) on AMX and CIP on the four MPs was enhanced with its concentration (0–50 mg/L). [Display omitted] •The adsorption of antibiotics by MPs is a multilayer adsorption process.•Adsorption of MPs to antibiotics belongs to chemical and physical dual process.•Hydrophobic interactions, partition, and electrostatic interactions control adsorption.•The presence of salt ions always inhibits the adsorption of MPs to antibiotics.•The maximum adsorption of antibiotics by MPs was reached at pH equal to 5.