Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method

Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method

Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of the Japan Society of Powder and Powder Metallurgy 1995, Vol.42 (3), p.289-292
Hauptverfasser: Hoshino, Koji, Komabayashi, Masashi, Kohno, Tohru
Format: Artikel
Sprache:eng ; jpn
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 292
container_issue 3
container_start_page 289
container_title Journal of the Japan Society of Powder and Powder Metallurgy
container_volume 42
creator Hoshino, Koji
Komabayashi, Masashi
Kohno, Tohru
description Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many micro-cracks, but the heat-treated foils had a little flexibility. Fe-24.4Cr-9.4Al alloy foil by the process had a good heat resistance at high temperatures better than Fe-20Cr-5Al alloy foil by usual rolling method.
doi_str_mv 10.2497/jjspm.42.289
format Article
fullrecord <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_27355489</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>27355489</sourcerecordid><originalsourceid>FETCH-LOGICAL-c2959-21b18dd791bbc4ddaba8901449c0c2a54eee69fa85e847e1f22edb3d56ba30023</originalsourceid><addsrcrecordid>eNotkM1OAjEYRRujiQTZ-QBduXKw7bRMuyTEQROMiei66c83UlKm2A4L3l4QV3dzcnNyELqnZMq4ap6227LfTTmbMqmu0IhKSSpFKL9GIyJqVslGqVs0KSVYQtisIUqqEVq2xubgzBBSj1OHW6gWuZpHPI8xHXGbQsT2iIcN4HXoB8jg8XoDMOCPFGPov_EbDJvk79BNZ2KByf-O0Vf7_Ll4qVbvy9fFfFU5poSqGLVUet8oaq3j3htr5FmSK0ccM4IDwEx1RgqQvAHaMQbe1l7MrKlP2vUYPVx-9zn9HKAMeheKgxhND-lQNGtqIbhUJ_DxArqcSsnQ6X0OO5OPmhJ9Dqb_gmnO9ClY_QtS8V5c</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>27355489</pqid></control><display><type>article</type><title>Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method</title><source>J-STAGE (Japan Science &amp; Technology Information Aggregator, Electronic) Freely Available Titles - Japanese</source><source>EZB-FREE-00999 freely available EZB journals</source><creator>Hoshino, Koji ; Komabayashi, Masashi ; Kohno, Tohru</creator><creatorcontrib>Hoshino, Koji ; Komabayashi, Masashi ; Kohno, Tohru</creatorcontrib><description>Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many micro-cracks, but the heat-treated foils had a little flexibility. Fe-24.4Cr-9.4Al alloy foil by the process had a good heat resistance at high temperatures better than Fe-20Cr-5Al alloy foil by usual rolling method.</description><identifier>ISSN: 0532-8799</identifier><identifier>EISSN: 1880-9014</identifier><identifier>DOI: 10.2497/jjspm.42.289</identifier><language>eng ; jpn</language><ispartof>Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol.42 (3), p.289-292</ispartof><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,4022,27921,27922,27923</link.rule.ids></links><search><creatorcontrib>Hoshino, Koji</creatorcontrib><creatorcontrib>Komabayashi, Masashi</creatorcontrib><creatorcontrib>Kohno, Tohru</creatorcontrib><title>Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method</title><title>Journal of the Japan Society of Powder and Powder Metallurgy</title><description>Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many micro-cracks, but the heat-treated foils had a little flexibility. Fe-24.4Cr-9.4Al alloy foil by the process had a good heat resistance at high temperatures better than Fe-20Cr-5Al alloy foil by usual rolling method.</description><issn>0532-8799</issn><issn>1880-9014</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1995</creationdate><recordtype>article</recordtype><recordid>eNotkM1OAjEYRRujiQTZ-QBduXKw7bRMuyTEQROMiei66c83UlKm2A4L3l4QV3dzcnNyELqnZMq4ap6227LfTTmbMqmu0IhKSSpFKL9GIyJqVslGqVs0KSVYQtisIUqqEVq2xubgzBBSj1OHW6gWuZpHPI8xHXGbQsT2iIcN4HXoB8jg8XoDMOCPFGPov_EbDJvk79BNZ2KByf-O0Vf7_Ll4qVbvy9fFfFU5poSqGLVUet8oaq3j3htr5FmSK0ccM4IDwEx1RgqQvAHaMQbe1l7MrKlP2vUYPVx-9zn9HKAMeheKgxhND-lQNGtqIbhUJ_DxArqcSsnQ6X0OO5OPmhJ9Dqb_gmnO9ClY_QtS8V5c</recordid><startdate>1995</startdate><enddate>1995</enddate><creator>Hoshino, Koji</creator><creator>Komabayashi, Masashi</creator><creator>Kohno, Tohru</creator><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>1995</creationdate><title>Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method</title><author>Hoshino, Koji ; Komabayashi, Masashi ; Kohno, Tohru</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c2959-21b18dd791bbc4ddaba8901449c0c2a54eee69fa85e847e1f22edb3d56ba30023</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>1995</creationdate><toplevel>online_resources</toplevel><creatorcontrib>Hoshino, Koji</creatorcontrib><creatorcontrib>Komabayashi, Masashi</creatorcontrib><creatorcontrib>Kohno, Tohru</creatorcontrib><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>Journal of the Japan Society of Powder and Powder Metallurgy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Hoshino, Koji</au><au>Komabayashi, Masashi</au><au>Kohno, Tohru</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method</atitle><jtitle>Journal of the Japan Society of Powder and Powder Metallurgy</jtitle><date>1995</date><risdate>1995</risdate><volume>42</volume><issue>3</issue><spage>289</spage><epage>292</epage><pages>289-292</pages><issn>0532-8799</issn><eissn>1880-9014</eissn><abstract>Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many micro-cracks, but the heat-treated foils had a little flexibility. Fe-24.4Cr-9.4Al alloy foil by the process had a good heat resistance at high temperatures better than Fe-20Cr-5Al alloy foil by usual rolling method.</abstract><doi>10.2497/jjspm.42.289</doi><tpages>4</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0532-8799
ispartof Journal of the Japan Society of Powder and Powder Metallurgy, 1995, Vol.42 (3), p.289-292
issn 0532-8799
1880-9014
language eng ; jpn
recordid cdi_proquest_miscellaneous_27355489
source J-STAGE (Japan Science & Technology Information Aggregator, Electronic) Freely Available Titles - Japanese; EZB-FREE-00999 freely available EZB journals
title Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-10T02%3A57%3A23IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Fabrication%20of%20Fe-Cr-Al%20Alloy%20Foil%20by%20the%20Sintered%20Sheet%20Rolling%20Method&rft.jtitle=Journal%20of%20the%20Japan%20Society%20of%20Powder%20and%20Powder%20Metallurgy&rft.au=Hoshino,%20Koji&rft.date=1995&rft.volume=42&rft.issue=3&rft.spage=289&rft.epage=292&rft.pages=289-292&rft.issn=0532-8799&rft.eissn=1880-9014&rft_id=info:doi/10.2497/jjspm.42.289&rft_dat=%3Cproquest_cross%3E27355489%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=27355489&rft_id=info:pmid/&rfr_iscdi=true