Fabrication of Fe-Cr-Al Alloy Foil by the Sintered Sheet Rolling Method
Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many...
Gespeichert in:
| Veröffentlicht in: | Journal of the Japan Society of Powder and Powder Metallurgy 1995, Vol.42 (3), p.289-292 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng ; jpn |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Zusammenfassung: | Fe-Cr-Al alloy foils were fabricated by a novel process with sintering and rolling. Porous sintered sheets of Fe-Cr-Al alloys were made by tape casting, sintered, and rolled into foils. The foils were treated by heating in Hz at 1250 deg C. The only rolled foils were very fragile because it had many micro-cracks, but the heat-treated foils had a little flexibility. Fe-24.4Cr-9.4Al alloy foil by the process had a good heat resistance at high temperatures better than Fe-20Cr-5Al alloy foil by usual rolling method. |
|---|---|
| ISSN: | 0532-8799 1880-9014 |
| DOI: | 10.2497/jjspm.42.289 |