C-band 120-Gb/s PAM-4 transmissions over a 100-km dispersion-uncompensated SSMF using joint combined pulse shaping and low-complexity nonlinear equalization
In C-band intensity modulation and direct detection (IM/DD) systems, the frequency-dependent power fading induced by chromatic dispersion (CD) and square-law detection limits the transmission capacity and distance, especially for beyond 100-Gb/s transmissions over a 100-km dispersion-uncompensated l...
Gespeichert in:
Veröffentlicht in: | Optics letters 2022-10, Vol.47 (19), p.5144-5147 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | In C-band intensity modulation and direct detection (IM/DD) systems, the frequency-dependent power fading induced by chromatic dispersion (CD) and square-law detection limits the transmission capacity and distance, especially for beyond 100-Gb/s transmissions over a 100-km dispersion-uncompensated link. To reach this goal, we propose a scheme of nonlinear pre-distortion, novel, to the best of our knowledge, combined pulse shaping, and post nonlinear equalization for four-level pulse amplitude modulation (PAM-4)-based IM/DD systems. At the transmitter, the nonlinear pre-distortion is used to generate unequally spaced PAM-4 symbols for pre-compensating the nonlinearities. While the novel pulse shaping, simply shaped by the linear combination of two inter-symbol interference (ISI)-free pulses, alters the frequency-domain power distribution of the PAM-4 signal and results in performance improvement. At the receiver, low-complexity post nonlinear equalization using an absolute-term based nonlinear equalizer with weight sharing (AT-NLE-WS) is performed to eliminate CD-induced power fading and residual nonlinear impairments. With the cooperation of these techniques, record 120-Gb/s PAM-4 signals are successfully transmitted over a 100-km standard single-mode fiber (SSMF) with the measured bit error ratio (BER) below 3.8 × 10
−3
, achieving >9% improvement of system capacity in comparison with the conventional pulse shaping schemes. |
---|---|
ISSN: | 0146-9592 1539-4794 |
DOI: | 10.1364/OL.473091 |