Contact forces and mechanisms in a vibratory finisher

Contact forces and mechanisms in a vibratory finisher

The normal and tangential contact forces in a vibratory finishing machine were measured using a newly developed force sensor. A video system was used to record the motion of the finishing media as it collided with the test surface. Media contact occurred in three different modes. The ratio of the no...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Wear 2002-04, Vol.252 (7), p.635-643
Hauptverfasser: Yabuki, A., Baghbanan, M.R., Spelt, J.K.
Format: Artikel
Sprache:eng
Schlagworte:
Applied sciences
Contact force
Exact sciences and technology
Friction coefficient
Friction, wear, lubrication
Impact
Machine components
Mass finishing
Mechanical engineering. Machine design
Metals. Metallurgy
Polishing. Blast cleaning
Production techniques
Surface treatment
Vibrating bed
Vibratory finishing
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The normal and tangential contact forces in a vibratory finishing machine were measured using a newly developed force sensor. A video system was used to record the motion of the finishing media as it collided with the test surface. Media contact occurred in three different modes. The ratio of the normal and tangential forces was compared with the measured friction coefficient under dry and water-wet conditions. This confirmed that media sliding occurred under water-wet conditions.
ISSN:0043-1648
1873-2577
DOI:10.1016/S0043-1648(02)00016-9