Nanosheet-assembled porous MnCo2O4.5 microflowers as electrode material for hybrid supercapacitors and lithium-ion batteries

[Display omitted] •MnCo2O4.5 microflowers were solvothermally obtained with a post annealing process.•The material possessed a huge specific surface area of 156.85 m2/g.•A specific capacity of 287.02 C/g at 1 A/g was obtained.•The HSC device delivered an energy density of 30.33 W h kg−1 at 959.35 W kg−1.•A high capacity of 1340.8 mA h g−1 at 0.1 A/g was available in LIB application. Herein, the MnCo2O4.5 microflowers (MFs) assembled by two-dimensional (2D) porous nanosheets were prepared through an initial solvothermal reaction with a subsequent annealing process. In this architecture, many interconnected 2D thin nanosheets were self-assembled together to form a 3D hierarchical MF with plenty of open channels. Such structure endows these MnCo2O4.5 MFs with large specific surface area of 156.85 m2/g for energy storage and provides rich ion diffusion pathways for ion transportation, thus the as-prepared MFs can exhibit good overall electrochemical performance in both hybrid supercapacitor (HSC) and lithium-ion battery (LIB). For the utilization in supercapacitor, the MFs deliver a specific capacity of 287.02 C/g at 1 A/g as well as a rate capability with 73.3 % capacity retention at 8 A/g. The energy density of the HSC assembled by MFs and activated carbon can reach up to 30.33 W h kg−1 at 959.35 W kg−1. When applied as the anode for Li-ion battery, a specific capacity of 1340.8 mA h g−1 at 0.1 A/g and cycling performance with low capacity loss of 0.73 mAh/g per cycle after 200 cycles at 0.5 A/g can be achieved. This work uncovers a repeatable and facile synthetic strategy to prepare transition metal oxides with large specific surface area and good overall electrochemical property.