Damage development in carbon/epoxy laminates under quasi-static and dynamic loading

The contrasting characteristics of damage evolution have been examined in a multidirectional carbon/epoxy composite laminate (IM7/8551-7) subjected to both quasi-static and dynamic loading. Our experiments were performed on bend-test bars that were loaded either in ‘supported' four-point bending or under ‘unsupported' conditions with a Hopkinson pressure bar to induce dynamic loading. We found differences in the damage that occurred in specimens loaded by the two techniques, in terms of the number of cracks and the length of the cracks. In the case of quasi-static loading, there were many matrix cracks within individual plies and only a few delamination cracks between plies; the maximum ratio of numbers of matrix to delamination cracks observed was 6:1. Despite their small number, the delamination cracks had a greater total length than the matrix cracks, and specimen failure occurred as a result of delamination crack propagation. During dynamic loading, the ratio between numbers of matrix and delamination cracks was 3:1, and in this case the ratio between the total crack lengths was unity. A quantitative assessment of damage induced during quasi-static bending was made from specimen stiffness results. Using simple beam theory and knowing the location of the damage, we correlated beam stiffness to the materials effective elastic modulus. We found that the composite's effective modulus decreased rapidly with small amounts of initial damage, but that subsequent increases in damage decreased the effective modulus at a much lower rate.